NetScaler ADC and NetScaler Gateway Security Bulletin for CVE-2026-8451, CVE-2026-8452, CVE-2026-8655, CVE-2026-10816, CVE-2026-10817, and CVE-2026-13474

NetScaler ADC and NetScaler Gateway Security Bulletin for CVE-2026-8451, CVE-2026-8452, CVE-2026-8655, CVE-2026-10816, CVE-2026-10817, and CVE-2026-13474

by | Juni 30, 2026 | ALARM, ctx_adc, ctx_workspace, WARNING

Article Id : CTX696604

Last Modified Date : 06-30-2026 13:30

Created Date : 06-30-2026 13:30

Article Record Type : Security BulletinSeverity :

 High

Summary

Severity – High

Description of Problem

Multiple vulnerabilities have been discovered in NetScaler ADC (formerly Citrix ADC) and NetScaler Gateway (formerly Citrix Gateway). Refer below for further details.

Affected Versions:

The following supported versions of NetScaler ADC and NetScaler Gateway are affected by the vulnerabilities: 

  • NetScaler ADC and NetScaler Gateway 14.1 BEFORE 14.1-72.61
  • NetScaler ADC and NetScaler Gateway 13.1 BEFORE 13.1-63.18
  • NetScaler ADC FIPS BEFORE 14.1-72.61 FIPS
  • NetScaler ADC FIPS and NDcPP BEFORE 13.1-37.272

Note: Secure Private Access Hybrid deployments using NetScaler instances are also affected by the vulnerabilities. Customers need to upgrade these NetScaler instances to the recommended NetScaler builds to address the vulnerabilities. 

This bulletin only applies to customer-managed NetScaler ADC and NetScaler Gateway. Cloud Software Group upgrades the Citrix-managed cloud services and Citrix-managed Adaptive Authentication with the necessary software updates.

Disclaimer

The information on this page is being provided to you on an «AS IS» and «AS-AVAILABLE» basis. The issues described on this page may or may not impact your system(s). Cloud Software Group, Inc. and its subsidiaries (collectively, «Cloud SG») make no representations, warranties, or guarantees as to the information contained herein. ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. BY ACCESSING THIS PAGE, YOU ACKNOWLEDGE THAT CLOUD SG SHALL IN NO EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES THAT ARISE OUT OF YOUR USE OR FAILURE TO USE THE INFORMATION CONTAINED HEREIN. Cloud SG reserves the right to change or update the information on this page at any time. We accordingly recommend that you always view the latest version of this page. The information contained herein is being provided to you under the terms of your applicable customer agreement with Cloud SG, and may be used only for the purposes contemplated by such agreement. If you do not have such an agreement with Cloud SG, this information is provided under the cloud.com Terms of Use, and may be used only for the purposes contemplated by such Terms of Use.

Details

NetScaler ADC and NetScaler Gateway are affected by the vulnerabilities mentioned below:


CVE-ID		Description Pre-conditionsCWECVSSv4

CVE-2026-8451		Insufficient input validation leading to memory overreadNetScaler ADC or NetScaler Gateway must be configured as a SAML IDPCWE-125: Out-of-bounds ReadCVSS v4.0 Base Score: 8.8 (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:L/VA:H/SC:N/SI:N/SA:N )

CVE-2026-8452		Memory overflow vulnerability leading to unpredictable or erroneous behavior and Denial of ServiceAppliance must be configured as:
Gateway (SSL VPN, ICA Proxy, CVPN, RDP Proxy)ORAAA virtual server		CWE-119 – Improper Restriction of Operations within the Bounds of a Memory BufferCVSS v4.0 Base Score: 8.8
(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:L/VA:H/SC:L/SI:L/SA:L)

CVE-2026-8655		Multiple Memory overflow vulnerabilities leading to unpredictable or erroneous behavior and Denial of ServiceNetScaler ADC must be configured as an LB of type OracleOR 
NetScaler ADC must be configured as a DNS ProxyOR NetScaler ADC must be configured as a DNS recursive resolver deployment		CWE-119 – Improper Restriction of Operations within the Bounds of a Memory BufferCVSS v4.0 Base Score: 8.8
(CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:H/SC:N/SI:N/SA:L)

CVE-2026-10816		Arbitrary File Read (Unauthenticated)Access to NSIP, Cluster Management IP or SNIP with management access enabledCWE-73: External Control of File Name or PathCVSS v4.0 Base Score: 7.1 ( CVSS:4.0/AV:A/AC:L/AT:N/PR:N/UI:N/VC:H/VI:L/VA:N/SC:N/SI:N/SA:N )

CVE-2026-10817		Insufficient input validation leading to memory overreadTCP TimeStamp enabled in TCP Profile and associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScalerCWE-125: Out-of-bounds ReadCVSS v4.0 Base Score: 6.9 (  CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N )

CVE-2026-13474		Denial of service via malformed HTTP/2 requestsHTTP/2 enabled in HTTP Profile and associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScalerCWE-401:Missing Release of Memory after Effective LifetimeCVSS v4.0 Base Score: 8.7 ( CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:L )

What Customers Should Do

Cloud Software Group strongly urges affected customers of NetScaler ADC and NetScaler Gateway to install the relevant updated versions as soon as possible. 

  • NetScaler ADC and NetScaler Gateway 14.1-72.61 and later releases
  • NetScaler ADC and NetScaler Gateway 13.1-63.18 and later releases of 13.1
  • NetScaler ADC 14.1-FIPS 14.1-72.61 FIPS and later releases of 14.1-FIPS
  • NetScaler ADC 13.1-FIPS and 13.1-NDcPP 13.1.37.272 and later releases of 13.1-FIPS and 13.1-NDcPP

CVE-2026-13474

Customers must upgrade to the above-mentioned NetScaler firmware versions that include the fix and update their configuration as described below. 
Configure the Http2SmallWndTimeout parameter, which controls the timeout (in seconds) for HTTP/2 small‑window stalled streams.

  • For appliances using HTTP Strict Profiles, this parameter defaults to 30 seconds, and the fix is effective immediately after the upgrade.
  • For appliances NOT using HTTP Strict Profiles, the default value is 0, and in that case, merely upgrading to the builds containing the fix WILL NOT address the vulnerability completely. In this case, customers must manually set Http2SmallWndTimeout to 30 seconds.

Please note that Http2SmallWndTimeout is a new parameter and is only available in the firmware builds that contain the fix.

Configuration command: 

set ns httpProfile <profile_name> -http2SmallWndTimeout <value_in_seconds> 

Steps to determine if an appliance meets the CVE preconditions

CVE-2026-8451: 

Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the specified string:

  • add authentication samlIdPProfile .*


CVE-2026-8452 :  

Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the specified string:

  • An Auth Server (AAA Vserver):
    • add authentication vserver .*
  • A Gateway (VPN Vserver,  ICA Proxy, CVPN, RDP Proxy) :
    • add vpn vserver .*

CVE-2026-8655 :

Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the specified string:

  • An LB or CS vserver of type Oracle(LB Vserver):
    • add lb vserver.*ORACLE.*
  • A CS or LB vserver of type DNS,DNS_TCP,  DOT or SSL with DNSoverHTTPS enabled :
    • add cs vserver.*DNS.*
    • add lb vserver.*DNS.*
    • add cs vserver.*DOT.*
    • add lb vserver.*DOT.*
    • add cs vserver.*SSL.*dnsOverHttps.*
    • add lb vserver.*SSL.*dnsOverHttps.*    
  • DNS global parameter or dns profile with recursive resolution enabled:
    • set dns parameter.*-recursion ENABLED.*
    • add dns profile.*recursiveResolution ENABLED

CVE-2026-10817:  

Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the specified string:

  • Search for “TimeStamp ENABLED” to identify all TCP profiles that have the TimeStamp option enabled.     
  • Then search for the identified TCP profile name to determine which vservers and services it is attached to.        

       Note: If TimeStamp is enabled on nstcp_default_profile, then all vservers and services that do not have an explicit TCP profile attached will be impacted, as they inherit nstcp_default_profile by default.
   
        Example:
        add ns tcpProfile custom_profile -TimeStamp ENABLED
        add lb vserver test_server HTTP 10.10.10.20 80 -persistenceType NONE -cltTimeout 180 -tcpProfileName custom_profile
        add service s1 20.20.20.2 HTTP 80 -gslb NONE -maxClient 0 -maxReq 0 -cip DISABLED -usip NO -useproxyport YES -sp OFF -cltTimeout 180 -svrTimeout 360 -CKA NO -TCPB NO -CMP NO -tcpProfileName custom_profile

CVE-2026-13474:  

Customers can determine if the appliance meets the precondition by inspecting their NetScaler configuration for the specified string:

  • Profile Check: Identify if -http2 ENABLED is set on any HTTP profile. If none are found, the appliance is considered non-vulnerable.
  • vServer Association: If such a profile exists, identify all LB, CS, and VPN vServers that reference it.
  • Default Profile Handling: If default profile nshttp_default_profile has -http2 enabled, identify all vServers that utilize this default profile. (i.e., those without an explicit -httpProfileName assignment).
             

ROX Netscaler Zertifikat-Automatisierung

by | Juni 9, 2026 | ctx_adc, INFO

Zukunftssichere Zertifikatsverwaltung im Zeitalter der 47-Tage-Zyklen – effizient, ressourcenschonend und vollautomatisch.

Die Lebensdauer von SSL/TLS-Zertifikaten sinkt bis 2029 drastisch. Die vom CA/B Forum beschlossene Massnahme sieht vor, die Gültigkeitsdauer von Zertifikaten schrittweise von derzeit 199 Tagen auf 47 Tage zu verkürzen. Somit wird aus einer jährlichen Aufgabe bald eine monatliche Pflicht.
Für Unternehmen, die Citrix Netscaler (ADC) im Einsatz haben, bedeutet diese Entwicklung das Ende der manuellen Zertifikatsverwaltung. Unsere leichtgewichtige, ACME-basierte Automatisierungslösung für Netscaler schliesst genau diese Lücke. Mit einem minimalen Footprint, breiter CA-Unterstützung und flexiblen Betriebsmodellen.

Mit unserer ACME-basierten Automatisierung profitieren Sie von:

  • 100% Vermeidung von Service-Ausfällen durch abgelaufene Zertifikate.
  • Minimalem Infrastruktur-Footprint dank leichtgewichtiger Architektur.
  • Breiter nativer Unterstützung für ACME fähige CAs wie z.B. Let’s Encrypt, Buypass, Digicert, Google, SSL.com und insbesondere ZeroSSL.

Was macht unsere ROX Zertifikat-Automatisierung besonders?

Im Gegensatz zu schwerfälligen PKI-Lösungen ist unsere Architektur auf das Wesentliche reduziert und kommt ohne aufwendige Server- oder Datenbankstrukturen aus. Alles, was vorausgesetzt wird, ist eine kleine, gehärtete Linux-basierte virtuelle Maschine (VM). Diese agiert als intelligenter Broker zwischen Ihren Netscalern und der Certificate Authority (CA) und wickelt den gesamten Lebenszyklus der Zertifikate vollautomatisch über den ACME-Standard ab. Nach der initialen Einrichtung erneuern und binden sich die Zertifikate auf den Netscalern völlig selbstständig – inklusive automatischer Speicherung der Config.

Unsere Empfehlung: ZeroSSL
Obwohl unsere Lösung flexibel verschiedenste CAs unterstützt, empfehlen wir bevorzugt den Einsatz von ZeroSSL. Als europäischer Dienst bietet ZeroSSL nicht nur einen klaren Heimvorteil in puncto Datenschutz und Zuverlässigkeit, sondern besticht technisch vor allem durch seine sehr einfache und robuste Integration. Dies garantiert einen besonders reibungslosen, fehlerfreien Automatisierungsprozess in Ihrer Infrastruktur.

Unsere ROX Appliance gibt es in zwei Varianten: Entweder als komplett durch uns betriebenen Managed Service für Ihre maximale Entlastung oder als On-Premises/Cloud-Variante für volle Kontrolle durch Ihr eigenes Team.

Skalieren Sie dynamisch, reduzieren Sie Kosten und schützen Sie Ihre geschäftskritischen Anwendungen mit höchster Sicherheit. Die ROX NetScaler SSL-Automatisierung ebnet Ihnen den Weg ins neue Web-Zeitalter.

Haben Sie Fragen oder möchten mehr erfahren? Wir sind immer für Sie da – kontaktieren Sie uns einfach!

Unser Lösung wird stetig weiter entwickelt, in Zukunft streben wir an auch andere Umsysteme anzubinden, z.B. Microsoft IIS, MS Exchange, usw. Sprechen Sie uns darauf an!